What to do if my Citizen Watch hand movement seems strange?
If the hand movement of your Citizen Watch seems strange, consider the following: * Stop altitude measurement or compass function. * Check and correct the reference position. * Execute altitude calibration. * Execute compass calibration. * Charge the watch, possibly requiring about 1 hour in direct sunlight. * Ensure the crown is pushed into position. * Stop altitude calibration.
How to fix Citizen Eco-Drive BN4044-15E Watch when 2 point correction cannot be performed?
If you cannot perform a 2 point correction on your Citizen Watch, it may be because the 2 point correction of the compass hand has not finished properly. You should execute the 2 point correction from the beginning again.
How to fix Citizen Eco-Drive BN4044-15E Watch compass direction measurement?
If your Citizen Watch cannot measure compass direction, try again in a place with normal magnetism.
Defines warning symbols like DANGER, WARNING, and CAUTION used in the manual.
Describes the second hand movement indicating low charge and the watch stopping if not charged.
Steps to check and correct the base positions of the watch hands.
Addresses issues when the compass hand points to a specific symbol and stays still.
Instructions on how to reset the watch to its initial status and subsequent required steps.
Details cell handling, replacement, and warnings against using non-specified batteries.
General| Brand | Citizen |
|---|---|
| Model | BN4044-15E |
| Movement | Eco-Drive |
| Case Material | Stainless Steel |
| Case Diameter | 46 mm |
| Dial Color | Black |
| Crystal | Mineral |
| Features | Date |
| Water Resistance | 200 meters / 20 ATM |
To Next Page