Adjusting the time
1
Pull the crown out to position when the
second hand points to 0 second.
All the hands stop.
• When using chronograph, the chronograph is
reset and 1/5 chronograph second hand returns
to 0 second.
2
Rotate the crown to adjust the time.
• The 24-hour hand also moves. Pay particular
attention to the hand to ensure AM or PM time
is set properly.
• When the watch shows around 12:00 AM, the
date indicator starts to change.
The date indicator does not change by rotating
the crown counterclockwise.
12
To Next Page
Loading...
