40 41
English
2. Press buttons
A
and
B
at the same time.
The reference position and the calendar are reset.
• When the reset is performed, the figures in the date window move slightly up and
down or right and left to tell you that the operation has been completed.
3. Set the reference position.
Follow the procedure from step 2-2 to 2-4 on page 39.
4. Push in the crown to position .
The settings are stored and “01” appears in the date window.
The calendar is set to “January 1st of a leap year.” To set the time, year, month, and
date again, refer to “Setting the time” (→ page 10) and “Setting the year, month, and
date” (→ page 14).
To Next Page
Loading...
