Citizen H10B - 6 The Method of the Time Difference Correction

27
6. The method of the time difference correction
When I went to areas where there is a time difference, by operating the second hand, you can set the time difference by
the hour to local time. step 1)the hour to local time. step 1) (B) When you press the button once, the second hand stops at 12 o'clock,
second hand at 12 o'clock is the time difference ± 0 hours.
If you? - ?? it is time difference setting, much of the time difference amount
And stops at the location.
Step 2) the crown in a state that does not draw, turn to the right
(1 click), you can set +1 hour time difference in a second
hand one step. Turn to the left, can be set to 1 hour in
seconds needle 1 step.
- ?? second hand at 12 o'clock is Japan time. Japan time
Standard to you is a time difference set to "± 27 hours".
Step 3) or after the set time difference in the (B) button is pressed once, what
If you also after 60 seconds without operation, after displaying the time
difference set time at high speed, the difference modified when the return to
the 1-second movement is terminated.
- 5
± 0
-10
-27
+ 5
+10
+27 (B) button
(Example) If Hong Kong was based on the Japan,?(Example) If Hong Kong was based on the Japan,?
-? Because there is a time difference of one hour,
to match the second hand 59 seconds position.