Citizen H800 - Page 24

46
47
English
Adjusting the time/calendar manually Adjusting the time/calendar manually
4. Press and release the upper right button
Ⓑ
to
select the correction target.
Each time you press and release the upper right button
Ⓑ
, the correction target changes as follows and the
corresponding hand slightly moves.
①
Time (minutes/hours/24 hour time)
→
②
date
→
③
day of the week
→
④
year and month
→
back to
①
24
12
60
30
1050
2040
ON
SMT
OFF
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
Ⓑ
0 1 2
S
M
T
W
T
F
S
5.
Rotate the crown to adjust each setting.
• Ifyouspinthecrownquickly,thehandsforthetimeanddatewillmovecontinuously.
To slow down and stop them, slightly rotate the crown.
• Tomovethedateforwardorbackwardbyoneday,slightlyrotatethecrown.
• Thedatechangesatapproximately0.00am.Ittakesaboutfivesecondsforthe
displayed date to completely change.
• Theyearandmonthareindicatedbytheminutehand.Refertothechartsonpages
48 and 49 for proper month and leap year setting.
6.
Repeat procedures 4 and 5.
7.
Push the crown in to position 0 to finish the setting.
The second hand starts moving from the 0 second position, and time/calendar indication
will resume.
• Pushinthecrownbyreferringtoareliabletimesource.
24-hour
hand
The minute, hour,
24-hour hands move
in conjunction with
one another.
③
Day of the week
When the chronograph
minute hand rotates five
times, the date advances by
one day.
④
Year and month
②
Date
①
Time
②
④
③
①
The chronograph
1/20 second
hand indicates
the day of the
week.