37
Calibrating compass indication
5
Press and release the lower left button
.
The second surrounding environment data is stored and the compass hand
points the 12 o’clock position. 2 point correction completes and compass
function starts.
•If the compass hand returns to the 3 o’clock position, try again from step 3.
•Press and hold the upper left button
for 3 seconds or more to cancel
the correction. When canceled, no correction is executed and the previous
correction result remains effective.
•Pressing and releasing the upper left button
and lower left button at the
same time before finishing step 5 reset the values of 2 point correction and
declination correction and the watch returns to compass function.
6
Press and release the upper left button
to finish the procedure.
To Next Page
Loading...
