To Next PageTo Next PageWhy has my Citizen JY8078-52L Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen JY8078-52L Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Как включить сигнал каждого часа.
Как включить сигнал каждого часа
General| Brand | Citizen |
|---|---|
| Model | JY8078-52L |
| Category | Watch |
| Movement | Eco-Drive |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Case Diameter | 45 mm |
| Dial Color | Blue |
| Crystal | Sapphire |
| Water Resistance | 200 meters |
| Functions | Chronograph |
Details how to check the charge level display for the watch.
Explains the concept and purpose of daylight saving time.
Details methods for setting daylight saving time automatically or manually.
Configure automatic updates for daylight saving time based on radio wave reception.
Set the operating conditions for the watch's automatic radio signal reception.
Details how the power saving function is automatically canceled when exposed to light.
Describes changes in digital displays and operations during 2-second interval movement.
Provides charging time estimates based on light exposure and includes cautions.
Instructions and warnings regarding the removal and disposal of the secondary battery.
Warnings about using only the specified battery type to prevent damage or injury.
Cautions for safe charging, especially regarding temperature and light sources.
Addresses issues with the watch failing to receive radio signals due to location or settings.
Diagnosing why the watch time is inaccurate and how to correct it.
Explains minor time deviations after successful radio wave reception.
Addresses the second hand moving to RX standby unexpectedly.
Troubleshooting steps when the watch stops running, often due to low charge.
Explains the 2-second interval movement indicating low charge or insufficient power.
Explains rapid hand movement after removing the watch from a static environment.
Steps to take if the watch remains non-functional even after attempting to charge it.
Addresses issues where watch hands or digital displays show abnormalities.
Explains water resistance ratings (WR) and their corresponding safe usage scenarios.
Guidance on using the watch based on its water resistance rating and cautions for wet conditions.
Instructions for cleaning the watch case, band, and maintaining water resistance.
Warnings about using the watch in extreme temperatures or near magnets.
Advice on avoiding static electricity and strong physical shocks to the watch.
Warnings about exposing the watch to chemicals, corrosive gases, or mercury.
Recommendation for regular inspections to maintain watch safety and performance.
Details core specifications like model number, type, time accuracy, and temperature range.
Lists the functions and information displayed in the analog part of the watch face.
Lists the functions and information displayed in the digital segments of the watch.
Details advanced functions like radio reception, alarms, chronograph, and world time.
Information on how long the watch operates on a full charge and under power saving.
Specifies the type of battery used in the watch.
