Why has my Citizen Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Why is my Citizen JY8051-08E Watch not receiving radio signals?
If your Citizen Watch isn't receiving radio signals, several factors could be at play. First, ensure that the home city setting (digital display 2) corresponds to your current reception area by checking the map and adjusting the setting accordingly. Additionally, obstructions or electronic noise could interfere with signal reception; try moving away from potential sources of interference and orient the watch with the 9:00 position facing the radio signal transmitter. Avoid moving the watch while it is receiving a signal. If the second hand is moving at 2-second intervals, charge the watch sufficiently by placing it in direct sunlight. Make sure that the mode is set to TME, CAL, or RX-S by pulling the crown out to position 1 and setting the mode accordingly. If the reception status is NO, c...
Explains how the watch receives radio waves to automatically correct time and date.
Describes displaying and setting time for 43 cities worldwide for travel convenience.
Guide on verifying and setting the watch hands to their correct zero position.
Steps for checking charge, setting home city, time, and digital display.
Details automatic, on demand, and recovery reception, including signal receiving steps.
Details how cities are assigned to transmitters and their time differences.
Guide on how to swap the home city time with the world city time.
Instructions for automatic and manual setting of daylight saving time.
Procedure for setting the watch time manually when radio reception is unavailable.
Steps to manually set the month, date, and year on the watch.
How to set the timer and operate it for countdown measurements.
Details on using the chronograph for measuring time intervals, including split times.
Guide to setting daylight saving time and showing/hiding cities for world time.
Instructions for setting and checking alarms for specific cities and times.
Configuration for automatic time updates and daylight saving time reception.
Procedure for resetting the watch and correcting its reference position.
Explains bezel operation and measuring elapsed/remaining time.
Details using the slide rule for navigation tasks like time, speed, and distance.
Covers basic math operations like multiplication, division, and square roots with the slide rule.
Tips for keeping the watch charged and functioning correctly using solar power.
Describes power saving modes, low charge indicators, and charging guidelines.
Addresses problems like no signal reception and suggests remedies.
Solutions for incorrect time, stopped watch, and abnormal displays.
Lists technical specifications, display functions, and additional features of the watch.
To Next Page
General