Troubleshooting
57
1
Stop altitude measurement or compass function
and check the power reserve indication.
•Charge the watch if the power reserve is lower than
“2”.
2
Pull the crown out to position
.
The 10 000 ft hand, 1 000 ft hand (compass hand) and
25 ft hand move to their current reference positions. Do
not execute any operation until all the hands stop.
3
Press and hold the upper left button
and lower
left button
at the same time for 4 seconds or
more.
As you release the buttons, the hands move slightly to
indicate that reset completed.
To Next Page
Loading...
