24-Hour Hand (PM Side)
Red tip indicates PM time
(12:00 PM to 11:59 PM)
24-Hour Hand (AM Side)
White tip indicates PM time
(12:00 AM to 11:59 AM)
Minute Hand
Second Hand
Hour Hand
Date Indicator
To set Base or ‘0’ position and then the time/date:
1) If your model features a screw down crown, unscrew crown ‘A’ from case.
2) When the second hand reaches 12:00, pull crown ‘A’ out two ‘clicks’. This will stop the second hand at the 12:00
or ‘0-position’.
3) With the crown ‘A’ pulled out two ‘clicks’, turn the crown clockwise until the PM side of the 24-hour indicator
(red tip side in this example) is pointing to 12:00 or ‘0-position’ (minute hand should also be pointing at 12:00 or
‘0-position’). Note: The AM side of the 24-hour indicator hand (white tip side in this example) indicates AM hours
(12:00 am through 11:59:59 am), while the PM side of the 24 Hour hand (red tip side in this example) indicates PM
hours (12:00 pm to 11:59:59 pm)
4) Push crown ‘A’ in 1 ‘click’. Rotate crown ‘A’ clockwise to move the hour hand until you see the date change. If
the hour hand is not already at the 12:00 position, continue to rotate the crown clockwise to move the hour hand to
the 12:00 position. This sets the hour to ‘midnight’ ensuring the date will change at night, rather than during the day.
5) Set the current date by rotating crown ‘A’ counterclockwise until the current date is shown in the date window.
The watch is now set for ‘midnight’ on the current date.
6) Pull crown ‘A’ out one ‘click’ to the time setting position.
7) Rotate crown ‘A’ clockwise to set your current time. Keep in mind that your watch is currently set at ‘midnight’
on today’s date.
8) Push crown ‘A’ to the closed position. The time, date and 24-hour time are now set. If your model features a
screw down crown, be sure to screw crown ‘A’ into the case.
Movement Caliber B877 Quick Setting Instructions
Crown ‘A’
24-Hour Time ‘AM’ Scale
24-Hour Time ‘PM’ Scale
Crown ‘B’
To Next Page
Loading...
