Why has my Citizen Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen PROMASTER NAVIHAWK are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen PROMASTER NAVIHAWK moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Why is my Citizen PROMASTER NAVIHAWK not receiving radio signals?
If your Citizen Watch isn't receiving radio signals, several factors could be at play. First, ensure that the home city setting (digital display 2) corresponds to your current reception area by checking the map and adjusting the setting accordingly. Additionally, obstructions or electronic noise could interfere with signal reception; try moving away from potential sources of interference and orient the watch with the 9:00 position facing the radio signal transmitter. Avoid moving the watch while it is receiving a signal. If the second hand is moving at 2-second intervals, charge the watch sufficiently by placing it in direct sunlight. Make sure that the mode is set to TME, CAL, or RX-S by pulling the crown out to position 1 and setting the mode accordingly. If the reception status is NO, c...
Overview of analog and digital display components of the watch.
Explanation of how the watch receives radio waves to set time and date.
Details on using the world time feature for 43 cities.
Information about the watch's solar power capability and charging.
Details on automatic daily radio wave reception.
Procedure for automatic reception after low charge or interruption.
Identifies the names and functions of the watch's eight modes.
Step-by-step guide to switching between home and world time displays.
Instructions for setting daylight saving time automatically or manually.
Detailed procedure for manually setting the watch's time.
Detailed procedure for manually setting the watch's date.
Guide on how to set the timer function.
Instructions for operating the chronograph function.
How to set daylight saving and show/hide cities for world time.
Procedure to set custom time differences for the home city.
Steps to set the alarm time for world cities.
How to configure automatic daylight saving time updates via radio.
Settings for automatic radio signal reception timing.
Overall procedure for configuring receive settings.
Lists default settings after a watch reset.
Step-by-step guide to reset the watch to factory defaults.
How to use Model 1 for operations and time measurements.
How to use Model 2 for navigation and general calculations.
Tips for optimal performance and charging of the solar watch.
Explanation of the watch's power saving modes.
Details on the warning indicators for low battery charge.
Information on the function preventing overcharging of the battery.
Table showing charging times based on light exposure and environment.
Warnings and guidelines for handling the watch and its battery.
Solutions for common problems related to radio signal reception.
Troubleshooting specific to the Eco-Drive power system.
Guidelines and warnings about the watch's water resistance levels.
Warnings about using the watch in extreme temperatures or near magnets.
General| Model Name | PROMASTER NAVIHAWK |
|---|---|
| Brand | Citizen |
| Case Material | Stainless Steel |
| Water Resistance | 200 meters |
| Radio Controlled | Yes |
| Movement | Eco-Drive |
| Band Material | Stainless steel |
| Functions | Chronograph, alarm |
To Next Page