14 15
1. Pull the crown out to position 1 and turn to align
the mode hand with CHR (chronograph mode).
2. Pull out the crown to position 2.
• The hands will move rapidly, stopping at the
reference position recorded in the watch
memory.
Correct reference positions
Charge level indicator: CHN
UTC hour and minute hands: 12:00
Hour, minute and second hands: 12:00:00
24-hour hand: 12:00
3. If the reference position is correct, the check is
now complete. Press the crown back into its
normal position.
• If a position is incorrect, refer to step 3 and later
in “Adjusting the Reference Position” and adjust
it to the correct position. (p. 74)
[Checking the Reference Position]
Before using the watch, confirm that the hands are aligned with
“0”, similar to when setting weighing scales
i The reference position may become misaligned when
the watch is exposed to strong magnetism, static
electricity or impacts. Even if radio waves are received,
the correct time will not be indicated unless the watch
hands are aligned to the correct reference position.
Check that the hands are properly aligned with “0”.
Examples of magnetic products that can affect
the watch.
• Health products (for example, medical necklaces and waist
bands that have magnetic fields)
• Refrigerators (magnetic part of the door)
• Electromagnetic cookers
• Bags (with magnet fasteners)
• Mobile phones (speaker part)
Keep the watch away from items similar to those above.
Hour, minute
and second
hands
UTC hour and
minute hands
24-hour
hand
Charge level
indicator
Mode hand
To Next Page
Loading...
Need help?
General
