6968
mA (Manual): The time is not updated with the daylight saving time from the received radio
wave.
[Automatic reception setting]
• Set the operating conditions for automatic reception.
MAN (Manual): The 4 a.m. automatic reception can be changed to any time of the day for the
home time.
* The time can be changed in 1-hour units. It cannot be set to 2 a.m. or 3 a.m.
OFF (Off): Automatic reception is not performed.
AUT (Auto): Automatic reception is performed according to the initial settings
(at 2 a.m., 3 a.m. and 4 a.m.).
WW
20. Using the Receive Setting (RX-S)
[Daylight saving time reception setting]
• Select whether to update the time with the daylight saving time from the received radio wave.
Refer to “Using Daylight Saving Time” (p.46) for details on daylight saving time.
AU (Auto): The time is updated with the daylight saving time from the received radio wave.
* The timing for changing to daylight saving time can vary depending on the city or
region. There may be cases when the time is not changed on the appropriate date.
* If AU is selected, when daylight saving time data is received for the daylight saving time
setting of the home city, the setting is changed to ON, and when no daylight saving time
data is received, the setting is changed to OF (off).
* When the radio wave of the area is received, daylight saving time for the corresponding
city is automatically updated to ON or OF (off). Refer to the “Received radio wave
transmitter” in “Table of UTC Time Differences” on page 36 for the radio wave that is
received in each city.
To Next Page
Loading...
Need help?
General
