Why has my Citizen PROMASTER SKY stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen PROMASTER SKY Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Why is my Citizen PROMASTER SKY not receiving radio signals?
If your Citizen Watch isn't receiving radio signals, several factors could be at play. First, ensure that the home city setting (digital display 2) corresponds to your current reception area by checking the map and adjusting the setting accordingly. Additionally, obstructions or electronic noise could interfere with signal reception; try moving away from potential sources of interference and orient the watch with the 9:00 position facing the radio signal transmitter. Avoid moving the watch while it is receiving a signal. If the second hand is moving at 2-second intervals, charge the watch sufficiently by placing it in direct sunlight. Make sure that the mode is set to TME, CAL, or RX-S by pulling the crown out to position 1 and setting the mode accordingly. If the reception status is NO, c...
Identifies environmental factors and locations that hinder radio signal reception.
Explains the visual indicators on the watch during radio signal reception.
Details how to check the success and quality of radio wave reception.
Provides information on geographical coverage and factors affecting radio signal reception.
Explains how to view and set times for different cities worldwide.
Describes how to interpret the watch's battery charge status.
Details how to measure elapsed and remaining time using the watch's slide rule bezel.
Explains how to perform navigation and general calculations with the slide rule bezel.
Describes how the watch conserves power when not exposed to light.
Explains indicators and behavior when the watch has low battery charge.
Details the function that prevents battery damage from overcharging.
Provides guidance on charging times under various lighting conditions.
Offers important safety and handling instructions for the solar-powered watch.
General| Movement | Eco-Drive (solar-powered) |
|---|---|
| Water Resistance | 200 meters |
| Case Material | Stainless steel |
| Functions | Date display, chronograph |
| Power Reserve | 6 months |
| Band Material | Stainless steel |
| Case Thickness | 12mm |
| Weight | 180 grams |
To Next Page