Why has my Citizen Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Why is my Citizen Watch not receiving radio signals?
If your Citizen Watch isn't receiving radio signals, several factors could be at play. First, ensure that the home city setting (digital display 2) corresponds to your current reception area by checking the map and adjusting the setting accordingly. Additionally, obstructions or electronic noise could interfere with signal reception; try moving away from potential sources of interference and orient the watch with the 9:00 position facing the radio signal transmitter. Avoid moving the watch while it is receiving a signal. If the second hand is moving at 2-second intervals, charge the watch sufficiently by placing it in direct sunlight. Make sure that the mode is set to TME, CAL, or RX-S by pulling the crown out to position 1 and setting the mode accordingly. If the reception status is NO, c...
Initial setup and preparation guidelines for the watch.
Fundamental procedures for operating the watch's core functions.
How the watch receives radio waves for accurate time synchronization.
Instructions on switching between the watch's various operational modes.
Setting and switching between home and world time zones for travel.
Information on setting and managing daylight saving time adjustments.
Manual procedure for setting the watch's time and date accurately.
Guide to manually setting the watch's calendar, including year, month, and day.
How to set and use the watch's built-in timer function for countdowns.
Instructions for operating the watch's stopwatch and timing functions.
Setting world cities and managing daylight saving time for different regions.
How to set and manage alarms for different world time zones.
Configuring radio wave reception settings and daylight saving time updates.
Information on activating and using the watch's LED display illumination.
Procedure for resetting the watch to its factory default settings.
Detailed steps for calibrating the watch hands to their correct reference positions.
Explanation of how the watch utilizes solar energy for power.
Details on watch behavior related to charging levels and power saving.
Common issues and solutions related to receiving radio time signals.
Technical details and features of the watch model.
General| Model Number | JY8078-52L |
|---|---|
| Movement | Eco-Drive |
| Caliber | U680 |
| Case Material | Stainless Steel |
| Case Diameter | 45mm |
| Dial Color | Blue |
| Water Resistance | 200 meters |
| Band Material | Stainless Steel |
| Power Reserve | 6 months |
| Special Edition | Yes, Blue Angels Edition |
| Functions | Chronograph, Alarm, Calendar |
| Glass | Sapphire Crystal |
| Features | Luminous Hands and Markers |
| Model | PROMASTER BLUE ANGELS |
To Next Page