Citizen PROMASTER NAVIHAWK User Manual

12 13
Check the
reception status.
• Pull out the crown to
position 1.
• Turn the crown to
align the mode hand
with TME.
• Return the crown to
the normal position.
• Press the lower right
button (A) at the
4:00 position.
(p. 26)
The second
hand indicates
a reception
status of H, M
or L
The second
hand indicates
a reception
status of NO
Refer to “On Demand
Reception” (p. 20) to
perform the radio wave
reception.
Your watch is
correctly receiving
the standard time
radio wave.
It is ready to use.
If you are unable to
receive radio waves,
please inquire to the
Citizen Service Center.
WW
2. Before Use
[Insufficient charging]
Charge level
indicator
[Fully charged]
Check the movement of
the second hand.
The second hand is
moving at 2-second
intervals or is stopped.
The second hand is
moving at 1-second
intervals.
Charge the watch
sufficiently by placing it in
direct sunlight as indicated
in “Guide to Charging
Time” (p. 100).
NO: Signal
reception failed
RX: Reception
standby
Reception level/
reception status
H: High
M: Middle
L: Low
Crown
Button (A)
Mode hand

Citizen PROMASTER NAVIHAWK Specifications

General

Model Name	PROMASTER NAVIHAWK
Brand	Citizen
Case Material	Stainless Steel
Water Resistance	200 meters
Radio Controlled	Yes
Movement	Eco-Drive
Band Material	Stainless steel
Functions	Chronograph, alarm