16 17
3.
Set the home time.
If the home time is correct,
(1) Set the time manually (p. 48)
(2) Set the time by receiving the radio
wave (p. 20)
Caution:
If the home city is set to a city that
is outside the reception area, the
radio wave cannot be received.
Set the time manually.
4.
Set digital display 1.
The world time or date can be
displayed on digital display 1.
Also, the mode can be switched
in order to use the alarm, timer
or chronograph. (p. 42)
WW
3. Basic Watch Operations
* The watch receives the radio wave from the radio wave transmitter located in the
home city’s region.
1.
Check the
charge level.
(p. 40)
2.
Set the home city.
If the city in which you are
situated is displayed in
digital display 2,
(1) Pull out the crown to
position 1 and turn to align
the mode hand with TME.
(2) With the crown pulled out to
position 1, press button (A)
or (B) to call up the home
city in digital display 1.
(3) Press button (A) and button
(B) at the same time to
display the home city in
digital display 2.
To Next Page
Loading...
Need help?
General
