1/4
U700 Abbreviated instruction
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
U700 instruction manual
English
Component identification
Chronograph 1/10 second
hand
Chronograph 1/100 second
hand
Chronograph second hand
Hour hand
Second hand
Button
M
Rotating bezel
24-hour hand
Button
B
Minute hand
Crown
Digital display
Button
A
• Actual appearance may differ from the illustration.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
(
http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf
)
Changing the mode
This watch features seven different modes: “Time and calendar”, “Chronograph”,
“Race”, “Lap record”, “World time”, “Alarm”, and “Timer”.
Race
World time
Lap recordChronograph
Alarm
Time and calendar
Timer
1.
Press and release the lower left button
M
repeatedly.
Setting the time and the calendar of the digital section
• The analog section (hour/minute/second hands) moves synchronously with the
digital section and indicates the time set here.
1.
Press and release the lower left button
M
repeatedly to
change the mode to “Time and calendar”.
2.
Pull out the crown.
The second hand moves to the 0 second position and all hands stop.
The area name starts blinking.
3.
Press and release the lower right button
A
or upper right
button
B
repeatedly to indicate an area name you want.
4.
Press and release the lower left button
M
repeatedly to
change the target to be set.
• Each time you press the button, the target changes as follows:
Area name
Year Date Month 12/24-hour basis Hour
Summer time Second Minute
5.
Press and release the lower right button
A
or the upper right
button
B
to adjust the setting.
• Pressing and holding any of the buttons changes indication continuously.
6.
Push in the crown to finish the procedure.
To Next Page
Need help?
General
