D
David WattsAug 1, 2025
What to do if all hands stop moving on my Citizen Watch?
- MMaria KellyAug 1, 2025
If all hands on your Citizen Watch stop moving, make sure the crown is pushed in to position 0. Also, the battery may need to be charged.
To Next PageTo Next PageWhat to do if all hands stop moving on my Citizen Watch?
If all hands on your Citizen Watch stop moving, make sure the crown is pushed in to position 0. Also, the battery may need to be charged.
Why is the second hand on my Citizen U200 moving only once every 2 seconds?
If the second hand on your Citizen Watch is moving only once every 2 seconds, it indicates that the battery needs to be charged.
Combines analog and digital time display.
Solar-powered, eliminates battery replacement.
View time/calendar for 30 cities worldwide.
Alarm sounds at selected city time.
Stopwatch and countdown timer capabilities.
Identifies watch components like buttons and displays.
Checking battery level and charging methods.
Explanation of the power saving function.
Steps to verify battery and initiate charging.
Guide to adjust watch time and date settings.
How to charge the watch using light exposure.
Explains the warning for low battery power.
Table of approximate charging times by light source.
Details the solar conversion technology.
How the watch prevents overcharging.
Digital displays turn off to save battery.
Saving power by pulling out the crown.
How to exit power saving mode.
How to navigate through watch functions using buttons.
Displays and sets the current time.
Displays and sets the date and day.
For setting and managing alarms.
Stopwatch function for time measurement.
Countdown timer function.
Steps to choose a city for world time display.
How world time affects other cities and analog section.
List of cities and their time offsets from UTC.
Detailed procedure for setting the digital time.
How to enable or disable DST.
Fine-tuning the time digits.
Choosing between 12-hour and 24-hour display.
How to pause or cancel time adjustment.
Procedure to set the analog time using the crown.
Steps for setting year, month, and day.
Automatic date adjustment until 2099.
How to pause or cancel calendar adjustment.
How to configure alarm times and cities.
Turning alarms on and off.
Listening to the alarm sound.
How to pause or cancel alarm setup.
Instructions for using the stopwatch function.
Details on measurement limits and behavior.
How to configure and run the countdown timer.
What happens when the countdown ends.
Solutions for issues with watch hands.
Solutions for unusual digital display behavior.
Addressing general watch problems.
Steps to restore the watch to factory settings.
Default configuration values after a reset.
Key warnings for watch usage.
Information on water resistance ratings and usage.
What activities are suitable for different water resistance levels.
Explains resistance for 3, 5, and 10/20 ATM ratings.
Procedures if water enters the watch.
How to keep the watch clean.
Warnings regarding the watch's internal battery.
Safety measures during battery charging.
Risks from extreme heat or cold.
How magnets can affect watch accuracy.
Preventing inaccuracy from static or drops.
Avoiding contact with harmful substances.
Routine cleaning and button/crown operation.
Recommended servicing for longevity and water resistance.
Identifies the watch model and its basic type.
Details on precision and operating temperatures.
Information on screen displays and battery duration.
Lists all supported features of the watch.
General
