See page 18 to set the time of the
digital section of this watch.
2. Turn the crown to the left or right to
adjust the time.
3. Push in the crown to position 0 on
the time tone on a radio, TV, etc.
The time setting finishes. All hands start
to move.
7 Setting the time of the analog section
Setting the time
Hour hand
Crown
Minute
hand
Second hand
1. Pull out the crown to position 1
when the second hand points to
the 0 second position.
All hands stop moving. You can adjust
the time of the analog section now.
To Next Page
Loading...
