Citizen U200 - Timer Functions; Setting and Using the Timer; Timer Completion Alert

32
33
English
3. Press button A to start countdown.
The timer indicator ( ) appears.
• Each time you press button
A, the countdown starts or stops.
• To restart the count from the set time, press button
B while the timer
is running.
• To reset the timer, press button
B while the timer is stopped.
4. Press button M to change the mode to [TME].
When the set time has passed
The time-up tone sounds for 5 seconds and the timer finishes.
The timer indicator (
) disappears.
• To stop the time-up tone, press any button.
The timer continues even if [TMR] is changed to another mode.
Using the timer [TMR]
You can set the countdown timer from 1 minute up to 99 minutes per 1 minute.
1. Press button M
repeatedly to change the
mode to [TMR].
The last timer setting starts
flashing and you can adjust the timer.
2. Press button B
repeatedly to set the time.
• If you press and hold
button
B, the figure
changes continuously.
Button B Button A
Button
M
Digital display B
U200_EN_final.indd 32-33 08.4.24 3:08:14 PM