3. Select the city
(1) Press button A repeatedly to select a city.
•
City names change continuously if you press and hold button A.
(2) Press button B to confirm the selection and go to the next step.
4. Adjust the time of alarm (hour/minute)
(1) Press button A repeatedly to set the flashing digit.
• The digit changes continuously if you press and hold
button
A.
(2) Press button B to confirm the selection and set the
next digit.
When minute is set, the alarm setting finishes and the alarm
indicator (
) appears.
5. Press button M repeatedly to change the mode to [TME].
or
1. Press button M repeatedly to
change the mode to [AL1] or
[AL2].
The current alarm setting is shown on
digital display
A and B.
2. Press and hold button B
until a city name starts
flashing.
You can adjust the alarm now. The alarm
switches ON automatically.
The way of setting the alarm are common to [AL1] and [AL2].
7 Setting the alarm
Using the alarm [AL1]/[AL2]
Button B Button A
Button
M
Digital display A
Digital display B
To Next Page
Loading...
