Using the alarm [AL1]/[AL2]
Button B Button A
Button
M
Digital display A
Digital display B
Interrupting the alarm setting
Press button M.
• The setting is interrupted in about
2 minutes without any operation.
Adjustment before pressing button
M
is effective even when you interrupt the
setting.
When the on time comes
The alarm tone sounds for 15 seconds.
• To stop the alarm tone, press any button.
7 Activating/deactivating the alarm
1. Press button M repeatedly to change the mode to [AL1] or [AL2].
The current alarm setting is shown on digital display A and B.
2. Press button A to select ON or OFF (OF).
• If you select ON, the alarm indicator ( ) appears.
3. Press button M repeatedly to change the mode to [TME].
<To check the alarm tone>
The alarm tone is different between
[AL1] and [AL2]. You can hear (check) the tones
by pressing and holding button
A in these modes.
• Release button
A to stop the tone.
• Checking the alarm tone activates/deactivates the alarm.
or
[AL1] and [AL2] will automatically
change to [TME] in about 2 minutes
without any operation after entering
these modes.
To Next Page
Loading...
