CITROEN C-CROSSER - Page 138

IX
PRA
C
TI
C
AL INF
O
RMATI
ON
1
36
After changing a wheel
When using the "space-saver" spare
wheel, do not exceed a speed of
50 mph (80 km/h).
Have the tightening of the bolts and
the pressure of the spare wheel
checked by a CITROËN dealer or a
qualifi ed workshop without delay.
Have the punctured wheel repaired
and replace it on the vehicle as soon
as possible.
Fittin
g
a wheel
List of operations
) Lower the vehicle fully.
) Fold the jack 2 and detach it.
) Tighten the security bolt using the
wheelbrace 1 fi tted with the security
socket 5 (if your vehicle is equipped
with security wheel bolts).
) Tighten the other bolts using the
wheelbrace 1 only.
) Store the tools (refer to the para-
graph "Access to the tools").
Fitting snow tyres
If you equip your vehicle with snow
tyres fi tted on steel wheel rims,
special bolts available from your
CITROËN dealer or a qualifi ed work-
shop must be used.
) Put the wheel in place on the hub.
) Screw in the bolts fully by hand.
) Pre-tighten the security bolt us-
ing the wheelbrace 1 fi tted with the
security socket 5 (if your vehicle is
equipped with security wheel bolts).
) Pre-tighten the other bolts using the
wheelbrace 1 only.
https://www.automotive-manuals.net/