CITROEN C3 2002 User Manual

2002
2002
CAR 050010
AC/QCAV/MTD
Méthodes Techniques Documentation
 ’’The intellectual property rights relating to the technical information contained in this document belong
exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part without
prior written authorisation from the manufacturer is forbidden.‘‘
PRIVATE CARS
«The technical information contained in this document is intended for the exclusive use of the trained personnel of the
motor vehicle repair trade. In some instances, this information could concern the security and safety of the vehicle. The
information is to be used by the professional vehicle repairers for whom it is intended and they alone would assume full
responsibility to the exclusion of that of the manufacturer».
«The technical information appearing in this brochure is subject to updating as the characteristics of each model in the
range evolve. Motor vehicle repairers are invited to contact the CITROËN network periodically for further information and
to obtain any possible updates».

CITROEN C3 2002 Specifications

General

Brand	CITROEN
Model	C3 2002
Category	Automobile
Language	English

Summary

GENERAL

Identification of Vehicles

Details vehicle identification markers like chassis stamp, data plate, paint code, and serial numbers.

OPERATIONS TO BE CARRIED OUT AFTER A REPAIR

GENERAL SPECIFICATION: LIFTING AND SUPPORTING THE VEHICLE

Front lifting

LUBRICANTS – TOTAL recommended oils

S.A.E. Norm - Table for selection of engine oil grade

Provides a table for selecting engine oil grades based on S.A.E. norm and temperature.

ENGINE SPECIFICATIONS

Engine type

Lists various engine types like HFX, KFV, NFU, 8HX, 8HW, 8HY, 8HV.

Cubic capacity (cc)

Specifies the cubic capacity for each engine type, ranging from 1124 to 1587 cc.

SPECIAL FEATURES : TIGHTENING TORQUES (m.daN)

CHECKING AND SETTING THE VALVE TIMING

Checking the valve timing

Details the procedure and tools for checking valve timing on HFX-KFV-NFU engines.

PETROL INJECTION

Make - Injection type

Lists the make and type of injection system for different petrol engines (e.g., Magnetti Marelli, Sagem, Bosch).

SAFETY REQUIREMENTS : HDi DIRECT INJECTION SYSTEM

Safety requirements

Emphasizes high pressures (1350 bars) and precautions like no smoking near the circuit.

AL 4 AUTOMATIC GEARBOX

AXLE GEOMETRY

Measuring front height

Details how to measure front height, including calculations for H1.

SUSPENSION

Front axle

Lists tightening torques and specifications for front axle suspension components.

Rear axle

Lists tightening torques and specifications for rear axle suspension components.

FEATURES OF ELECTRIC POWER STEERING

Steering column

BRAKE SPECIFICATIONS (WITHOUT ABS)

BRAKE SPECIFICATIONS (WITH ABS)

FR (Front) Disc

BLEEDING AND FILLING THE BRAKING SYSTEM

Draining, refilling

CHECKING THE EFFICIENCY OF THE AIR CONDITIONING SYSTEM

Checking TEMPERATURES