CITROEN C3 PLURIEL 2004 User Manual

PRIVATE CARS
C2-C3-C3 PLURIEL-XSARA
XSARA PICASSO-BERLINGO
PRIVATE CARS
CAR 050014
Volume 1
2004
AC/QCA
V/MTD
Méthodes techniques documentation
f «The intellectual property rights relating to the technical information contained in this document
belong exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part
without prior written authorisation from the manufacturer is forbidden».
«The technical information contained in this document is intended for the exclusive use of the trained
personnel of the motor vehicle repair trade. In some instances, this information could concern the security and
safety of the vehicle. The information is to be used by the professional vehicle repairers for whom it is
intended and they alone would assume full responsibility to the exclusion of that of the manufacturer».
«The technical information appearing in this brochure is subject to updating as the characteristics of
each model in the range evolve. Motor vehicle repairers are invited to contact the CITROËN network
periodically for further information and to obtain any possible updates».
2004

CITROEN C3 PLURIEL 2004 Specifications

General

Brand	CITROEN
Model	C3 PLURIEL 2004
Category	Automobile
Language	English

Summary

GENERAL

IDENTIFICATION OF VEHICLES

Details on identifying vehicle specifications for C2, C3, XSARA, BERLINGO.

CAPACITIES (in litres)

Fluid capacities for various vehicle models and engine types.

ENGINE OIL CONSUMPTION

Guidelines on acceptable engine oil consumption levels.

ENGINE

ENGINE SPECIFICATIONS

Detailed specifications, torque values, and timing for different engines.

SPECIAL FEATURES - TIGHTENING TORQUES (m.daN )

Specific torque values for engine component assembly.

AUXILIARY EQUIPMENT DRIVE BELT

Procedures for removing and refitting auxiliary drive belts.

CHECKING AND SETTING THE VALVE TIMING

Procedures for checking and setting engine valve timing.

INJECTION

DEPOLLUTION TECHNICAL CHECKS (FRANCE)

Technical checks for depollution in France.

EMISSION STANDARDS

Emission standards for various vehicles and engines.

SAFETY REQUIREMENTS: HDi DIRECT INJECTION SYSTEM

Critical safety precautions for HDi direct injection systems.

PROHIBITED OPERATIONS: SIEMENS HDI DIRECT INJECTION SYSTEM

Prohibited operations for Siemens HDI injection systems.

CHECKS: LOW PRESSURE FUEL SUPPLY CIRCUIT

Procedures and values for checking low-pressure fuel supply.

CLUTCH / TRANSMISSION

CLUTCH SPECIFICATIONS

Clutch specifications for various models and engines.

GEARBOX AND TYRE SPECIFICATIONS

Gearbox and tyre specifications for different models.

MA/5 GEARBOX

Details and diagrams of the MA/5 gearbox.

AL4 AUTOMATIC GEARBOX

AL4 automatic gearbox identification and features.

AXLES / SUSPENSION / STEERING

AXLE GEOMETRY C2

Front and rear axle geometry specifications for C2 models.

SPECIAL FEATURES: STEERING

Features and adjustments for the steering system.

FRONT AXLE

Front axle specifications and tightening torques.

REAR AXLE XSARA

Rear axle specifications and identification.

BRAKES

BRAKE SPECIFICATIONS

Brake system specifications for various models and ABS configurations.

HANDBRAKE (Adjustment)

Procedure for adjusting the handbrake.

BLEEDING THE BRAKES XSARA PICASSO

Procedure for bleeding the brake system for XSARA PICASSO.

ELECTRICAL SYSTEM

STARTER MOTORS

Starter motor class and climate allocation based on vehicle and gearbox.

ALTERNATORS

Alternator class allocation based on vehicle, gearbox, climate, and air conditioning.

CHARGING CIRCUIT - ALTERNATOR WITH MONO-FUNCTION REGULATOR

Procedures for checking alternator output and voltage regulator.

AIRCON

SPECIAL FEATURES: AIR CONDITIONING SYSTEM (R 134.a)

Air conditioning system features and components.

AIR CONDITIONING SYSTEM R 134.a

Procedures for checking air conditioning system efficiency.

IMPORTANT

OPERATION TO RECONNECT THE BATTERY