To Next PageTo Next Page
Need help?Do you have a question about the CITROEN C3 PLURIEL and is the answer not in the manual?
General| Brand | CITROEN |
|---|---|
| Model | C3 PLURIEL |
| Category | Automobile |
| Language | English |
Re-initialises scanning function after battery reconnection.
Activates tailgate opening after battery reconnection.
Re-initialises vehicle's overspeed values.
Re-initialises sequential and anti-pinch functions.
Re-initialises anti-pinch function for sun roof.
Adjusts date, time, and display language.
ECU searches for satellites in open air for vehicle location.
Reprogrammes radio stations.
Reprogrammes radio stations.
Procedure for draining engine oil using gravity.
Procedure for draining engine oil via suction.
Recommended oils for Citroën C4, year 2004.
Recommended oils for New Look Citroën C5.
Guidelines for using 10W40 semi-synthetic oil.
Details on energy economy oil descriptions.
Classification of engine oils by recognized organizations.
Tightening torques for the right-hand engine support.
Tightening torques for the torque reaction rod.
Tightening torques for the left-hand engine support on gearbox.
Tools for drive belt replacement.
Procedure for removing the auxiliary drive belt.
Procedure for refitting the auxiliary drive belt.
Tools for valve timing check and setting.
Steps to check engine valve timing.
Procedure for removing engine components for valve timing.
Valve clearance check procedure when engine is cold.
Possible procedures for valve clearance settings.
Tools for low pressure fuel supply circuit checks.
Procedure for checking low pressure fuel supply.
Tools for turbo pressure checks.
Procedure for checking turbo pressure.
Preparatory steps for turbo pressure test.
Steps for performing the turbo pressure test.
Tools for air supply circuit checks.
Procedure for checking air supply using a vacuum pump.
Tools for EGR valve checks.
Safety and cleanliness for diesel injection engines.
Procedure for checking the EGR valve.
Conditions for axle geometry checks and adjustments.
Vehicle height measurements for reference.
Anti-roll bar specifications for private vehicles.
Anti-roll bar specifications for enterprise vehicles.
Anti-roll bar specifications for CRD vehicles.
Tightening torques for front axle suspension components.
Tightening torques and identification for steering column.
Identification by colour of steering ring.
Procedure for centring the steering rack.
Initial steps for steering rack centring.
Steps for setting the steering rack.
Refitting procedures after steering rack centring.
Conditions for axle geometry checks and adjustments.
Vehicle height measurements for reference.
Axle geometry specifications for the front axle.
Axle geometry specifications for the rear axle.
Conditions for axle geometry checks and adjustments.
Vehicle height measurements for reference.
Notes regarding axle geometry measurements.
Axle geometry specifications for the front axle.
Axle geometry specifications for the rear axle.
Tightening torques and identification for steering column.
Identification by colour of steering ring.
Procedure for centring the steering rack.
Initial steps for steering rack centring.
Steps for setting the steering rack.
Refitting procedures after steering rack centring.
Braking circuit diagram without ABS, rear drum brakes.
Specifications for the braking system.
Specifications for the brake pedal gear.
Tightening torques for front brake components.
Tightening torques for rear brake components.
Steps for adjusting the handbrake.
Components to remove for handbrake adjustment.
Procedure for bleeding and refilling the braking system.
Steps for draining the braking system.
Refitting steps after brake bleeding.
Instructions for filling the braking system.
Procedure for bleeding the braking system.
Specifications for the brake pedal gear.
Tightening torques for front brake components.
Tightening torques for rear brake components.
Steps for adjusting the handbrake.
Components to remove for handbrake adjustment.
Procedure for bleeding and refilling the braking system.
Steps for draining the braking system.
Refitting steps after brake bleeding.
Instructions for filling the braking system.
Procedure for bleeding the braking system.
Tools for A/C system seal replacement.
Information on MANULLI seals for A/C compressor.
Location and procedure for removing/refitting the pollen filter.
Steps to remove the pollen filter.
Steps to refit the pollen filter.
Procedure for changing the A/C system's filtering/drying cartridge.
Tools required for cartridge replacement.
Steps to remove the filtering/drying cartridge.
Essential information on compressor lubricant usage.
Procedures for checking compressor oil level in different scenarios.
Preparatory steps before checking A/C efficiency.
Recommended settings for A/C controls during efficiency check.
Interpretation of A/C system measurement values.
Explanation of under-cooling and its relation to A/C fluid quantity.
Table of under-cooling values and origins.
Expected blown air temperature range.
Interpretation of A/C system diagnosis results.
Table for diagnosing A/C circuit problems and causes.
Symptoms and possible causes for abnormal A/C pressure levels.
Symptoms and causes for A/C operating in back-up mode.
Tightening torques for A/C system R 134.a components.
Tightening torques for A/C system R 134.a components.
