162
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMENDATIONS - PRECAUTIONS (AL 4 AUTOMATIC GEARBOX)
Engine : KFV
IMPERATIVE : For a certain period of time, while the ECU parameters are adapted to the gearbox, there may be an inconsistent gear
selection quality. To achieve a consistent standard, it will be necessary to carry out a road test taking in frequent gear changes
(auto-adaptive laws).
ECU : Downloading, Configuration, Initialisation (pedal) (continued)
Pedal initialisation.
A pedal initialisation must be carried out in the following cases :
- Replacement of the automatic gearbox ECU.
- Replacement of the automatic gearbox.
- Downloading of the ECU configuration.
- Adjustment or replacement of the accelerator cable.
- Replacement of the throttle potentiometer.
Downloading.
ECU downloading procedure :
- Follow the diagnostic tooling procedure.
A new ECU or downloaded update is always configured
with the following options :
- SHIFT LOCK gear selection lever position.
- OBD outlet (emission standard L4).
If the ECU is to be fitted to a vehicle without one or both
of these options:
- Carry out a configuration which inhibits the diagnosis of the
option(s) concerned.
To Next Page
Loading...
