CITROEN C5 User Manual

System that temporarily stops the engine during traffic stops.

Driving aid that warns when crossing lane markings unintentionally.

Provides extra visibility on bends and improves cornering lighting.

Provides brightness and improved ventilation in the passenger compartment.

Warns of obstacles and checks tyre pressure automatically.

Details of the remote control key functions and buttons.

How to open the fuel filler flap and lock/unlock the cap.

Steps to open the bonnet and access the spare wheel.

Description of the complete tyre repair kit system.

System to adjust comfort levels independently for driver and passenger.

System that assists in finding a parking space.

Latest technology in audio and communication systems.

Automatic application/release and manual locking/unlocking.

Automatic operation and manual control of the electric parking brake.

System that immobilizes vehicle on gradients for easier starting.

System to maintain a maximum speed that should not be exceeded.

System to maintain a constant vehicle speed programmed by the driver.

Steering lock, drive position, and starter operation.

Selection of indicators and the 'Motorway' function.

Overview of the electronic gearbox and its positions.

Operation in auto-active, sequential, SPORT, and SNOW modes.

System putting the engine into standby mode during stops.

How to deactivate and reactivate the Stop & Start system.

System measuring parking space availability between vehicles.

Activating parking sensors and lane departure alerts.

Advice on using gearbox and driving smoothly for economy.

Tips for using electrical equipment to save fuel.

Panel grouping for dials, indicators, and warning lamps.

Accessing main menu, language, units, and vehicle parameters.

System providing journey information like range and consumption.

Explanation of visual indicators for malfunctions and system operations.

Warning lamps for braking fluid level, ABS, and electric parking brake faults.

Warning lamps for ESP/ASR, engine faults, and brake pad wear.

Warning lamps for low fuel, high coolant temp, battery charge, and seat belts.

Confirmation of system operation via indicator lamps and signals.

Warnings for diesel pre-heating, parking brake, passenger airbag, and Stop & Start.

Indicators confirming intentional system switch-off (airbag, ESP/ASR).

Information displayed when the next service is due.

Indication that the vehicle service is overdue.

System informing about the engine oil level status.

Indications for normal and severe operating conditions.

Indication of fuel low warning lamp and reserve level.

System measuring total distance travelled by the vehicle.

Manual adjustment of instrument and control brightness.

System measuring distance travelled since last reset.

Displays context-dependent information on the screen.

Access to functions like Personalisation, Radio-CD, Bluetooth.

Steps to adjust screen brightness, contrast, and display mode.

Adjusting date, time, screen configuration, and units.

Switching displayed information (date, radio, CD, etc.) on the screen.

Displays context-dependent info like time, date, temp, sensors, audio, phone.

Using the control panel to select applications and functions.

Accessing configuration settings like display, speech synthesis, language.

Choosing screen colour, adjusting brightness, setting date/time, and units.

Setting navigation voice volume and selecting display/voice language.

Activating/deactivating driving and comfort systems like parking help and wipers.

Listing active alerts and associated messages.

Overview of ventilation components like sunshine sensor and air diffusion grilles.

Using automatic regulation for optimal comfort and efficiency.

Operation of the mono-zone air conditioning system.

System's normal operating mode with automatic control of functions.

How to adjust temperature using manual controls.

Adjusting functions manually while leaving others in automatic mode.

Adjusting air distribution and flow levels.

Clearing windows quickly using front demisting and rear defrosting.

Demisting the rear screen and door mirrors using control 8.

Function to isolate passenger compartment from exterior fumes.

Independent regulation of temp. and air distribution for driver/passenger.

Automatic control of air flow, temp, distribution, and recirculation.

Adjusting temperature for driver and passenger using controls 2a and 2b.

Adjusting air flow distribution for driver and passenger sides.

Adjusting air flow level and reducing it to switch off air conditioning.

Operation of air conditioning when the engine is running.

Automatic air intake mode and manual control.

Rear screen and mirror demisting operation.

Clearing windows quickly when AUTO mode is insufficient.

How the programmable heating operates independently of the engine.

Buttons and displays of the remote control for programming heating.

Accessing and displaying functions using remote control buttons.

Procedure for setting the time on the remote control.

Activating heating immediately and setting its duration.

Setting the heating duration and saving the selected level.

Programming departure time for automatic heater start time calculation.

Activating and deactivating programming via buttons.

Adjusting heating level from C1 to C5.

Replacing the battery in the remote control.

Procedure to reinitialise the remote control after battery issues.

Adjustments for head restraint, backrest, seat height, lumbar, and heated seats.

Electric adjustments for seat height, angle, backrest, lumbar, and head restraint.

Switching on and selecting heating level for front seats.

Activating the back massage function and its operating cycles.

Assisting entry and leaving the vehicle by moving the seat.

Storing driver's seat and air conditioning settings.

Adjusting and removing rear head restraints for safety.

Folding rear seats and removing seat cushions for load space.

Steps for refitting seat cushion and returning seat back.

Adjustment, folding, and unfolding of door mirrors.

Adjustable mirror with anti-dazzle system.

Adjusting mirror glass and setting day/night position.

Automatic adjustment of mirror for day/night use based on light.

Adjusting steering wheel for height and reach.

System for central unlocking/locking, locating, and protection.

Complete and selective unlocking procedures using remote or key.

Opening the boot using the remote control button.

Normal and deadlocking using remote control or key.

Locking and deadlocking the vehicle using the key in the door.

Folding the remote key and locating the vehicle in a car park.

Operating and setting the duration of guide-me-home lighting.

System preventing engine starting without the correct key code.

Steering lock, drive position, and starter operation.

Engine stopping procedure for vehicles with turbochargers.

What to do if the remote control fails to unlock/lock the vehicle.

Procedure to reinitialise the remote control after battery issues.

Replacing the battery in the remote control.

Procedure for ordering a new key if keys are lost.

Precautions and advice for using the remote control.

Warnings against modifying the electronic engine immobiliser system.

Checking key pairing and ensuring only your keys work.

System protecting against theft and break-ins with various monitoring types.

Activating the alarm system with full monitoring.

Deactivating alarm and interior/anti-tilt monitoring.

Re-activating interior volumetric and anti-tilt monitoring.

Alarm indication and procedure for remote control failure.

Locking the vehicle using the key without activating the alarm.

Controls for electric windows, including one-touch operation.

Anti-pinch for rising windows and safety procedure for ice.

Reinitialising electric windows if they don't rise automatically.

Deactivating rear electric windows and door controls using control 5.

Opening doors from outside and inside.

Full manual locking/unlocking of doors and boot from inside.

Unlocking vehicle with button A; locking/unlocking with central locking.

Automatic locking/unlocking of doors and boot while driving.

Manual locking/unlocking of doors in case of system or battery failure.

Opening and locking/unlocking the boot for Saloon models.

Mechanical release of the boot in case of battery or central locking malfunction.

Manually locking doors using the key and interior controls.

Manual and electric opening, closing, and locking of the Tourer boot.

Storing an opening angle for the tailgate.

Cancelling the stored tailgate opening position.

What to do if the tailgate motor overheats and cuts out.

Operating the sunroof in closed, open, and tilted positions.

Anti-pinch for sunroof closing and safety procedure for ice.

Re-initialising the anti-pinch function after battery issues.

Opening and closing the blind step-by-step or fully.

Re-initialising the anti-pinch function for the blind.

Capacity, low fuel warning, and opening the fuel flap.

Procedure for refuelling the vehicle, including safety precautions.

Device to prevent filling Diesel tank with petrol.

Compatibility of engines with biofuels and fuel types.

Control stalk for selection and control of front and rear lamps.

Adapting visibility with sidelamps, dipped, main beams, and foglamps.

Automatic modes for headlamps and manual controls for wipers.

Operating front and rear foglamps using the selection ring.

Warning for lighting left on when the door is opened.

System switching on front lamps for visibility by day.

Keeping dipped beam headlamps on after ignition off for easier exit.

Automatic switching of headlamps based on light conditions.

Additional options for guide-me-home lighting, including duration setting.

Adjusting halogen bulb headlamp height according to vehicle load.

Automatic correction of xenon headlamp beam height.

'Cornering lighting' function providing additional lighting for bends.

How the cornering lighting function is activated and deactivated.

How the function follows road direction, linked with xenon headlamps.

Activating/deactivating via screen and fault indication.

System for selection and control of front and rear wipers.

Wiper commands issued via stalk A and ring B.

Wiping speed selection stalk for windscreen wipers.

Rear wiper selection ring for park, intermittent, and wash-wipe.

Automatic wiper modes like rain-sensitive wipers and rear wiping.

Rear wiper operation when reverse gear is engaged.

Automatic wiper operation adapting to rainfall intensity.

Activating windscreen wash and headlamp wash.

Position for cleaning or replacing wiper blades.

Operation of front and rear courtesy lamps.

Different lighting times available for interior lamps.

Operating map reading lamps with the ignition on.

Operation of rear reading lamps for Tourer models.

Interior lighting for centre console and door handles.

Operation of lamps illuminating the central console.

Lighting for interior door opening controls, deactivated with child lock.

Components of welcome lighting: interior lamps, floor, and pavement lighting.

Illumination of interior and ground next to vehicle when door is open.

Operation of the sun visor, including its illuminated mirror.

Opening, closing, and features of the cooled glove box.

Flap in backrest for carrying long objects and how to open it.

Removing and refitting floor mats, with safety precautions.

Adjusting the front armrest and accessing cup holder/USB port.

Comfort and storage system for rear passengers.

Operating side blinds and the rear blind for Saloon models.

Location of 12V socket and access to oddments tray.

Location of battery, boot floor, lamp, and CD changer.

Using securing rings to secure luggage in the boot.

Hooks, luggage cover blind, securing rings, and loading height control.

Rolling up, removing, installing, and securing the luggage cover.

Installing and using the high load retaining net.

Using approved seats and rear seat safety.

Installing rearwards-facing seats and deactivating passenger airbag.

Installing forwards-facing seats and adjusting vehicle seat position.

RÖMER Baby-Safe Plus ISOFIX installation.

KIDDY Comfort Pro and KLIPPAN Optima booster seat.

RÖMER KIDFIX, fitted using ISOFIX mountings.

Table showing possibilities for installing child seats by weight and position.

How the ISOFIX system provides fast and safe child seat fitting.

ISOFIX rings (lower and upper) for Saloon and Tourer models.

Incorrect installation risks, seat belt fastening, and booster seat advice.

Correct positioning of seat belt parts and using a booster seat with a back guide.

Safety advice regarding leaving children or animals unattended in vehicles.

Activating the electric child lock system.

Deactivating the electric child lock system.

Fault indication for the electric child lock system.

Selecting indicators and using the 'Motorway' function.

Visual warning for breakdowns, towing, or accidents.

Using horn and making emergency/assistance calls.

System automatically checking tyre pressures while driving.

Indications for correct inflation and detection modes.

Indication of under-inflated or punctured tyres.

Automatic detection and driver request for punctured tyres.

Indication of wheels not monitored and system limitations.

Supplementary systems for optimum braking in emergencies.

Systems improving stability and manoeuvrability during braking.

Warning lamps and messages indicating ABS or EBFD faults.

System enabling optimum braking pressure more quickly.

How ASR and ESP optimize traction and stability.

Automatic activation and advised deactivation in exceptional conditions.

System to improve traction on snow and deep fresh snow.

Front seat belts with pretensioning system and force limiter.

Correct seat belt fastening and ESP/ASR reactivation.

Fault indication for the ESP/ASR systems.

Adjusting seat belt height for correct positioning.

Three-point inertia reel seat belts with force limiter in rear seats.

Incorrect installation risks, seat belt fastening, and booster seat advice.

Safety advice regarding leaving children or animals unattended in vehicles.

System designed to maximise occupant safety in collisions.

Airbag deployment in serious impacts and deflation.

Protection for head and chest in front impacts.

Warning lamp indicating passenger airbag deactivation.

Fault indication for the front airbag system.

Protection for driver/passenger in side impacts.

Protection for occupants in side impacts to limit head injuries.

Fault indication for airbags, potentially due to minor impacts or roll-overs.

General safety rules for effective airbag operation.

Precautions for driving with front airbags and using lateral airbags.

Precautions regarding fixing items to the roof near curtain airbags.

Mechanical device for immobilising the vehicle when stationary.

Applying the parking brake lever and releasing it.

Automatic operation and manual control of the electric parking brake.

Automatic application when engine stops and release with accelerator.

Manual application of parking brake while engine is running.

Releasing the brake via accelerator or clutch pedal.

Deactivating automatic parking brake functions via menu.

Manual application and release of the parking brake.

Releasing the parking brake and its confirmation indicators.

Utilising maximum application of the parking brake in specific situations.

Automatic alteration of parking brake level in certain situations.

Pulling and holding control lever A to stop the vehicle in emergencies.

Using an emergency device to release the electric parking brake if it fails.

Table of operating faults for the electric parking brake and their consequences.

System that keeps the vehicle immobilised temporarily on gradients.

How the hill start assist works on ascending and descending gradients.

Starting the vehicle and engaging reverse gear in a 5-speed manual gearbox.

Engaging reverse gear in a 6-speed manual gearbox.

System reducing fuel consumption by advising gear changes.

How the gear shift indicator intervenes and its recommendations.

Choice between automatic and manual gear changing.

Automatic, sequential, SPORT, and SNOW driving modes.

Using paddles to change gear, with precautions.

Gear lever position and driving mode displayed on the instrument panel.

Procedure for starting the engine and moving off.

Engaging reverse gear and avoiding neutral while moving.

Gearbox selecting suitable gears based on driving style, road profile, and load.

Using steering mounted controls or gear lever for manual gear changes.

Activating the SPORT programme for a dynamic driving style.

Procedures for stopping the vehicle, including engaging neutral or gear.

Fault indication for the gearbox system.

System putting the engine into standby mode during stops.

How the Stop & Start system works, including the ECO warning lamp.

Conditions where STOP mode is not invoked.

Engine restarting automatically and the ECO warning lamp.

Conditions for automatic START mode invocation.

Deactivating the Stop & Start system using the 'ECO OFF' switch.

Reactivating the Stop & Start system.

Fault indications for the Stop & Start system.

Requirements for the 12V battery and precautions for fitting.

Overview of automatic gearbox and driving modes.

Automatic, sequential, SPORT, and SNOW modes.

Display of gear lever position and driving mode.

Safety precautions for engaging gears, especially P and R.

Procedure for starting the engine and moving off.

Using P position and engaging reverse gear with precautions.

Never selecting neutral while the vehicle is moving.

Gearbox selecting suitable gears based on driving style, road profile, and load.

Using steering mounted controls or gear lever for manual gear changes.

Special programmes supplementing automatic operation.

Activating SPORT mode for a dynamic driving style.

Adapting gearbox to slippery roads and improving traction.

Returning to auto-adaptive mode from SPORT or SNOW programmes.

Controls on steering wheel for audio, trip computer, cruise control, phone.

Scrolling menus, confirming selections, and accessing main menu.

Cancelling operations, returning to previous screen, and accepting calls.

Volume, mute, source selection, and MODE selection.

System preventing the vehicle from exceeding programmed speed.

Selecting speed limiter mode and activating it.

Suspending or resuming cruise control/speed limiter.

Exceeding the programmed speed temporarily using the accelerator.

Returning to normal driving from cruise control or speed limiter.

Fault indication for speed limiter or cruise control.

System automatically maintaining programmed vehicle speed.

Selecting cruise control mode and activating it.

Adjusting memorised speed using buttons 1 and 2.

Suspending or resuming cruise control.

Temporarily exceeding programmed speed using the accelerator.

Returning to normal driving from cruise control.

Fault indication for cruise control.

System detecting involuntary lane marking crossing.

Activating and deactivating the lane departure warning system.

How the system warns the driver (seat cushion vibration).

Fault indication for the lane departure warning system.

System measuring parking space availability between vehicles.

States of the parking space sensor warning lamp (off, on, flashing).

Steps for identifying a parking space and measuring it.

Function deselects automatically under certain conditions.

System using proximity sensors to detect obstacles.

Activating and fully deactivating the parking sensors system.

Automatic activation of the reversing camera when reverse gear is engaged.

Blue lines for direction, red lines for distance, green lines for proximity.

Re-activating the reversing camera system.

System adjusting suspension for comfort and road holding.

Display of selected mode (Normal, Sport) and how to change it.

Message indicating when a position is not authorised.

How ground clearance varies with speed, road surface, and ignition.

Using Normal, Low, High positions for driving and loading.

Steps for opening and closing the bonnet, including safety catch and stay.

Bleeding water from the diesel fuel filter.

Steps for removing and refitting the protective cover for the filter.

Procedures for priming the fuel system after running out of fuel.

Access points for checking fluid levels and replacing components in petrol engines.

Access points for checking fluid levels and replacing components in the 2.0i 16V engine.

Access points for checking fluid levels and priming the fuel system in diesel engines.

Access points for checking fluid levels and components in HDi 160/200 engines.

Access points for checking fluid levels and components in V6 HDi 240 engine.

Using dipstick and instrument panel to check engine oil level.

Checking brake fluid level and its relation to brake pad wear.

Brake fluid spec, oil grade, and change intervals.

Topping up power steering fluid.

Checking and topping up coolant level, with precautions.

Checking and topping up screenwash and headlamp wash fluid.

Warning for low diesel additive level and topping up.

Precautions for handling used oil and fluids.

Battery maintenance, terminal checks, and precautions for working on the battery.

Function of the particle filter and regeneration process.

Replacement intervals for air and passenger compartment filters.

Replacement interval for the oil filter.

Manual and automatic gearboxes do not require maintenance.

Brake wear depends on driving style and checks needed.

Information on checking brake disc wear.

Checking parking brake effectiveness between services.

Complete system for temporary tyre repair.

Steps for using the puncture repair kit.

Precautions regarding sealant cartridge contents and handling.

Warning lamp remains on after repair until system reinitialised.

Finding and using the tools in the protective holder.

List of specific tools provided with the vehicle for wheel changing.

Procedures for accessing, removing, and repositioning the spare wheel.

Steps for parking, positioning the jack, and undoing wheel bolts.

Safety precautions before positioning the jack.

Steps for fitting a wheel onto the hub and tightening bolts.

Information about tyre pressure sensors and required repairs.

Removing and using security bolts and sockets.

Front lamps and Xenon headlamp bulb replacement.

Warning about Xenon bulb replacement risks.

Bulb types and replacement procedures for halogen headlamps.

Steps for replacing main beam headlamp bulbs.

Steps for replacing dipped beam headlamp bulbs.

Steps for replacing directional lamp bulbs.

Steps for replacing front foglamp bulbs.

Steps for replacing direction indicator bulbs.

Replacing a faulty side repeater bulb.

Identifying and replacing bulbs in rear lamps for Saloon models.

Replacing bulbs in boot-mounted lamps.

Steps for removing, replacing, and refitting wing-mounted lamps.

Identifying and replacing bulbs in rear lamps for Tourer models.

Replacing bulbs in boot-mounted lamps.

Removing the lens and changing the bulb for number plate lamps.

Contacting dealer for replacement of LED third brake lamp.

Replacing bulbs in roof lamps, map reading lamps, and rear reading lamps.

Replacing bulbs in boot lamp, pavement lighting, and floor lighting.

Replacing bulb in glove box light.

Procedure for replacing a failed fuse with a new one.

Accessing fuses in fuseboxes A, B, and C under the dashboard.

Table of fuses in Fusebox A and their functions.

Table of fuses in Fusebox B and their functions.

Table of fuses in Fusebox C and their functions.

Accessing and changing fuses located under the bonnet.

List of fuses under the bonnet and their functions.

Fuses F6 to F9 for rear socket, foglamps, diesel burner, and parking brake.

Precautions before installing electrical equipment or accessories.

Battery maintenance, terminal checks, and access procedures.

Location of the battery in the boot for V6 HDi engines.

Use of specific 12V lead-acid battery for Stop & Start system.

Procedure for starting the engine using an external battery.

Instructions for charging the battery and handling procedures.

Precautions before and after disconnecting/reconnecting the battery.

System managing function usage to conserve battery charge.

Resuming functions and switching to economy mode.

Procedure for towing your vehicle using a removable towing eye.

Locating and accessing the towing eye.

Steps for towing your vehicle using the front bumper cover and towing eye.

Steps for towing another vehicle using the rear bumper cover and towing eye.

Precautions for towing with all wheels on ground or two wheels on ground.

Towbar suitability and vehicle design for trailer towing.

Load distribution, side wind sensitivity, cooling, braking, and tyre advice.

Using approved roof bars and securing loads.

Load distribution, anchoring, driving advice, and removal of roof bars.

Device preventing snow particle intake that could obstruct the air filter.

Setting the flap to vertical position for snow intake.

Offering and clipping the snow guard sections to the front bumper.

Detaching fixing clips to remove the snow guard.

Conditions requiring removal of the snow guard (temp, towing, speed).

Recommendations to avoid damaging paintwork with inappropriate cleaning.

Table of exterior dimensions in millimeters for Saloon models.

Table of interior dimensions in millimeters for Saloon models.

Table of exterior dimensions in millimeters for Tourer models.

Table of interior dimensions in millimeters for Tourer models.

Location of VIN plate, VIN on body/dashboard, and paint colour code.

Checking tyre pressures regularly and using recommended sizes.