ERY COLD PROTECTION *
Adjustable device which prevents
the intake of snow particles, which
could obstruct the air fi lter.
HDi Diesel 160 PEF engine
Normal position
The fl ap 2 is in a horizontal position
in the air duct 3 .
Snow position
) Push and rotate the knob 1 by
90 ° in the direction of the arrow
in order to position the fl ap 2 in a
vertical position in the air duct 3 .
To return to the normal position,
push the knob 1 then rotate in the
opposite direction.
It is essential to remove the very
cold protection:
- When the ambient temperature
exceeds 10 °C.
-
When driving at speeds of over
75 mph (approximately 120 km/h).
V6 HDi Diesel 240 PEF
engine
Snow position
Slide the defl ector 1 into the air
duct 2 and clip in.
* According to country.
To Next Page
Loading...
