IX
150
DRIVING
SPEED LIMITER
System which prevents the vehi-
cle from exceeding the speed pro-
grammed by the driver.
When the limit speed is reached, the
accelerator pedal no longer has any
effect.
The speed limiter is switched on man-
ually: a speed of at least 20 mph (ap-
prox. 30 km/h) must be programmed.
The speed limiter can in no way re-
place respect for speed limits or vigi-
lance and responsibility on the part
of the driver.
Steering mounted controls
The speed limiter switches are lo-
cated on the left-hand side of the
steering wheel.
Displays in the instrument panel
The speed limiter information is dis-
played in zone A of the instrument
panel.
Programming
) Press on button 4 to select speed
limiter mode " LIMIT ".
The selection is confi rmed by the
display of the function in zone A of
the instrument panel.
Activation
) Press on button 3 when the de-
sired maximum speed is dis-
played.
The information "ON" then appears
in zone A .
When the function is selected, the
last memorised speed and the infor-
mation "PAUSE" are displayed.
With the engine running, you can
adjust the memorised maximum
speed, displayed in zone A , by
pressing on:
) Button 1 to increase the memo-
rised maximum speed.
) Button 2 to decrease the memo-
rised maximum speed.
Successive presses will modify the
maximum speed in steps of 1 mph
and a continuous press in steps of
5 mph.
To Next Page
Loading...
