To roll up
) Press the handle (PRESS) gen-
tly. The luggage cover rolls up
automatically.
The moving part A can be folded
along the rear bench seat backrest.
To remove
) Compress the control 1 and lift
the luggage cover on the right
then on the left to remove it.
To install
) Position the left-hand end of the
luggage cover roller in its loca-
tion B behind the rear bench
seat.
) Compress the roller control 1
and put the roller in place in its
location C on the right.
) Release the control to secure
the luggage cover.
) Unroll it to its fastening on the
rear pillar.
High load retaining net
(Tourer)
Hooked onto the special upper and
lower fi xings, this permits use of the
entire loading volume up to the roof:
- behind the rear seats (row 2),
- behind the front seats (row 1)
when the rear seats are folded.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.
To Next Page
Loading...
