CITROEN C5 - Installation

VI
104
FITTINGS
Installation
) fold down the backs of the rear
seats,
) position the high load retaining
net roller above the two rails 1 lo-
cated behind the rear seats (2/3
bench seat). The two notches 2
must be placed above the two
rails,
) slide the two rails 1 into the
notches 2 and push the roller
(lengthways) from right to left to
secure it,
) reposition the rear seat backs.
Row 1 Row 2
To use it in row 1:
) fold down the
backs of the
rear seats,
) open the cov-
ers 3 of the
corresponding
upper fi xings,
) unroll the high load retaining net
and position one of the ends of
the net's metal bar in the cor-
responding fi xing cover. Check
that the hook is secured in the
rail located inside the cover 3 ,
) pull the high load retaining net's
metal bar to position the other
hook in the second fi xing cover.
To use it in row 2:
)
open the covers
4 of the corre-
sponding upper
fi xings,
) from the rear bench seat, unroll
the high load retaining net, push-
ing it to detach it from the retaining
hooks,
) position one of the ends of the
net's metal bar in the corre-
sponding fi xing cover. Check
that the hook is secured in the
rail located inside the cover,
) position the other hook in the
second fi xing cover and pull the
metal bar towards you.