EasyManua.ls Logo

CITROEN C5 - Stop & Start System Faults and Maintenance; Stop & Start System Operating Faults; Stop & Start System Battery Requirements

CITROEN C5
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IX
!
!
143
DRIVING
In the event of a fault with the sys-
tem, the "ECO OFF" switch warning
lamp ashes then comes on con-
tinuously.
Have it checked by a CITROËN
dealer or a quali ed workshop.
In the event of a fault in STOP mode,
the vehicle may stall: all the instru-
ment panel warning lamps come on.
It is then necessary to switch off the
ignition and start the engine again
using the key.
Operating fault
The Stop & Start system
makes use of advanced tech-
nology. For any work on the sys-
tem go to a quali ed workshop with
the skills and equipment required,
which a CITROËN dealer is able to
provide.
Before doing anything under
the bonnet, deactivate the
Stop & Start system to avoid
any risk of injury resulting from au-
tomatic operation of START mode.
Maintenance
This system requires a 12 V battery
with a special speci cation and tech-
nology (reference numbers available
from CITROËN dealers).
Fitting a battery not listed by
CITROËN introduces the risk of mal-
function of the system.
To charge the battery, use a 12 V
charger and observe the polarity.

Table of Contents

Other manuals for CITROEN C5

Related product manuals