II
MF
R
4
AUTOMATIC AIR
CONDITIONING
Automatic operation
) Set the temperature control dial 1 to
the temperature required.
) Place the air fl ow control dial 2 in
the "AUTO" position.
) Place the air distribution adjustment
dial 3 in the "AUTO" position.
When the engine is cold, to avoid an
excessive distribution of cold air, the
ventilation will reach its optimum level
gradually.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than the comfort tempera-
ture. There is no need to change the
temperature displayed in order to
reach the comfort required rapidly.
The automatic regulation of the air
conditioning will operate to correct
the temperature difference as quickly
as possible.
1. Temperature adjustment
2. Air fl ow adjustment
3. Air distribution adjustment
4. Intake of exterior air/Recirculation
of interior air
5. Air conditioning On/Off
6. Rear screen demist/defrost
In automatic mode:
) when the temperature is set to max-
imum (Rapid heating), the intake of
exterior air is activated and the air
conditioning stops.
) when the temperature is set to mini-
mum (Rapid cooling), the air recir-
culation is activated and the air con-
ditioning operates.
The system controls the air distribu-
tion, the fl ow, the temperature and the
air intake to ensure the level of comfort
selected and adequate air circulation in
the passenger compartment. No further
action on your part is required.
https://www.automotive-manuals.net/
To Next Page
Loading...
