CITROEN C-Elysee - Page 124

122
CITROËN Connect Radio
Press this button to enter a name for the
prole using the virtual keypad.
Press "OK" to save.
Press the back arrow to conrm.
Press this button to activate the prole.
Press the back arrow again to conrm.
Press this button to reset the selected
prole.
Adjusting the brightness
Press Settings to display the main page.
Press Brightness.
Move the slider to adjust the brightness of
the screen and/or the instrument panel
(depending on version).
Press in the shaded area to conrm.
Modifying system settings
Press Settings to display the main page.
Press "Conguration" to access the
secondary page.
Press "System conguration".
Press the "Units" tab to change the units of
distance, fuel consumption and temperature.
Press the "Factory settings" tab to restore the
initial settings.
Returning the system to factory settings
activates the English language by default
(depending on version).
Press the "System info" tab to display the
versions of the various modules installed in the
system.
Press the "Privacy" tab,
or
Press Settings to display the main page.
Press "Privacy" to activate or deactivate
the private data mode.
Activate or deactivate:
–
"No sharing (data, vehicle position)".
–
"Only data sharing”
–
"Data and vehicle position sharing"
Press the back arrow to conrm.
Press Settings to display the main page.
Press "Conguration" to access the
secondary page.
Press "Screen conguration".
Press "Brightness".
Move the slider to adjust the brightness of
the screen and/or the instrument panel
(depending on version).
Press the back arrow to conrm.
Press "Animation".
Activate or deactivate: “Automatic
scrolling”.
Select "Animated transitions".
Press the back arrow to conrm.
Selecting the language
Press Settings to display the main page.
Press "Conguration" to access the
secondary page.
Select "Language" to change the
language.
Press the back arrow to conrm.
Setting the time
Press Settings to display the main page.
Press "Conguration" to access the
secondary page.
Press "Date and time".
Select "Time".
Press this button to set the time using the
virtual keypad.
Press "OK" to save the time.