CITROEN C-Elysee - Page 16

14
Dashboard instruments
Setting the date and time
With instrument panel
Use the left-hand button on the instrument panel
to carry out the operations in the following order:
► Press the button for more than two seconds:
the minutes ash.
► Press the button to increase the minutes.
►
Press the button for more than two seconds:
the hours ash.
► Press the button to increase the hours.
►
Press the button for more than two seconds:
24H or 12H is displayed,
► Press the button to select 24H or 12H.
►
Press the button for more than two seconds
to complete the adjustments.
After approximately 30 seconds with no action,
the display returns to normal.
Audio system/Bluetooth
Use the audio system buttons to carry out the
operations in the following order:
► Press the "MENU" button.
► Using the arrows, select the
"Personalisation - Conguration" menu then
conrm by pressing the dial.
►
Using the arrows, select the "Screen
conguration" menu then conrm.
► Using the arrows, select the "Set date and
time" menu then conrm.
► Select the setting then conrm.
►
Modify the setting then conrm again to save
the change.
► Adjust the settings one by one, conrming
each time.
► Select the "OK" tab on the screen then
conrm to exit the "Set date and time" menu.
For more information on setting the date
and time with the CITROËN Connect
Radio or CITROËN Connect Nav, refer to
the corresponding sections.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
Instrument panel screen
Monochrome screen C
Data displays
► Press the button at the end of the wiper stalk
to display successively the di󰀨erent trip computer
data. The trip computer data is as follows:
•
Range.
• Current fuel consumption.
• Distance travelled.
• Average fuel consumption.
• Average speed.
► The next press then returns you to the normal
display.