147
9
Practical information
C1_en_Chap09_info-pratiques_ed01-2015
F Tighten the wheel bolts using the
wheelbrace 1.
F Store the tools and the wheel in the boot.
F Lower the vehicle to the ground.
F Fold the jack 2 and detach it.
After changing a wheel
As soon as possible, have the
tightness of the wheel bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop.
Have the punctured tyre repaired or
replaced and refit it to the vehicle as
soon as possible.
Do not exceed 50 mph (80 km/h) when
using the "space-saver" spare wheel.
F Position the wheel on the hub.
F Screw in the bolts fully by hand.
F Pre-tighten the bolts using the
wheelbrace 1 only.
To Next Page
Loading...
