CITROEN C2 - Access to the spare wheel

4
3
5
2
1
V
120
C H A N G I N G A W H E E L
Never get underneath the vehicle if it is supported only by
the jack.
When changing a wheel, it is essential to park the vehicle
safely on level and stable ground.
Access to the tools
To access the toolkit:
Tilt the RH seat as if to enter the
rear of the vehicle,.
Locate the kit under the seat
and pull it towards the rear of
the vehicle.
The jack is stowed in a protection
box inside the spare wheel under-
neath the boot.
•
•
Tools
1.
Wheelbrace.
2.
Movable towing eye.
3.
Central embellisher removing
tool for accessing the wheel
bolts (For vehicles with alumin-
ium wheel rims).
4.
Tool for removing wheel bolt
protectors (For vehicles with
aluminium wheel rims).
5.
Extension.
The alloy wheel anti- theft sockets
are to be found in the glovebox.
Light alloy wheels
If your vehicle has light alloy wheel
rims but a steel spare wheel, if you
fi t the latter it is normal to notice
that the wheel bolts do not appear
to contact on the rim.
The spare wheel is secured by the
conical tapering of the wheel bolt’s
shaft (See illustration).
when refi tting the light alloy wheel,
make sure that the tapering contact
faces of the wheel bolts are clean
and in good condition.