N AV I G AT I O N – T R A F F I C I N FO R M ATI O N
When navigation is to be used for the
fi rst time, or when the battery has been
disconnected for any reason, the naviga-
tion system has to be initialised. For this
operation the vehicle must be parked
outdoors so that it can pick up satellite
signals. Turn the ignition to position M
(see vehicle Handbook) and leave for at
The on-board navigation system uses audible
and visual instructions to guide you towards
the destination of your choice.
The system uses a cartographic database
stored on a CD-ROM, and a GPS system.
The GPS system enables your position
to be plotted via contact with a number of
The navigation system is composed of the
A button for recall of the last voice mes-
sage - during navigation, a long press
on the end of the lighting control stalk
repeats the latest voice information.
Cartographic data in the form of a CDROM
that has to be inserted, printed side up,
A synthesised voice for enunciating the
guidance instructions during navigation.
Control on the dashboard and controls at
Specifi c functions or services may vary
depending on the CD-ROM version or the
country where the system is used.
GPS satellite reception or guidance cal-
culation may be affected temporarily (for
example under bridges or in underground
car parks, etc.) by where the vehicle is
In some countries, traffi c information mes-
sages are transmitted by FM radio stations.
Such information, broadcast by the RDS
system, can be received and decoded by
NaviDrive. See the description of this func-
VOLUME FOR VOICE INSTRUCTIONS
When receiving voice instructions, you can
adjust the volume using button
You can deactivate voice instructions via
MAIN MENU FOR NAVIGATION – TRAF-
the icon Navigation - Traffi c information to
access the following choices :
After the start of a guidance, a display cau-
tions you concerning the use of navigation.
If you accept its content, press on
Respect the road regulations that are in