CITROEN C2 - INSTRUMENT PANEL LIGHTING - BLACK PANEL; Lighting rheostat; Night driving (headlamps on); Night driving

D
A
B
C
II
33
I N S T R U M E N T PA N E L L I G H T I N G –
B L A C K PA N E L
Lighting rheostat
The dimmer is active when the
lamps are on and affects:
The instrument panel: Rev
counter, fuel level display.
The display screen.
The air conditioning control
panel.
Selection of mode and brightness
is done by pressing the dimmer
button
A
on the instrument panel.
Night driving (headlamps on)
4 levels of brightness + 1 level for
Black panel.
Adjustment is by successive
presses on button A in the follow-
ing cycle:
level 4

level 3

level 2

level 1

Black panel.
•
•
•
This function is to give you the best
possible visual conditions for driv-
ing at night.
In black panel mode, the following
information only will be displayed
temporarily, should you request it
or in the event of an alert:
The warning lamps in zone
C
(bottom area of the instrument
panel) will come on in the event
of an alert: e.g. fuel low, coolant
temperature.
The direction indicator warning
lamps.
The speed indicator.
The gear engaged.
The mileage recorder each time
you press button
B
.
The automatic air conditioning
display each time you press
one of the buttons.
The trip computer information.
•
•
•
•
•
•
•
Night driving
The fi rst press on button
D
“DARK” places the display on
standby. Only the time and the
temperature remain visible at
the top of the screen.
A second press on
D
switches
the screen and the instrument
panel off (black panel) with the
exception of information con-
cerning for example:
The speed indicator.
The gearbox.
Cruise control / Speed limiter
if this has been activated.
Note:
Timed lighting of func-
tions if you:
Press any of the display con-
trols.
Select Radio-CD.
Operate any of the air condi-
tioning controls.
Note:
All the displays come on
if there is an alert.
A third press on
D
returns you
to normal lighting.
•
•
-
-
-
-
-
-
•