This is the distance that can still be travelled on the amount of fuel remaining in the
When the distance remaining to be travelled is less than approx. 25 km (15 miles),
only three dashes will be displayed.
Instantaneous consumption
This is the result from the consumption recorded within the last 2 seconds. This func-
tion is only available when travelling at over 30 km/h (approx. 20 mph).
It indicates the distance remaining to be travelled to the destination.
To enter this, see NaviDrive instructions.
This is the distance that has been travelled since the last reset to zero of the Journey
This is the relationship between the fuel consumed and the distance travelled since
the last reset to zero of the trip computer.
This is obtained, from the last reset to zero of the trip computer, by dividing the dis-
tance travelled by the time taken (with ignition switched on).
To Next Page
Loading...
