Check that the windscreen and rear wipers can operate freely when
for example a bicycle-carrier is fi tted, or in freezing conditions.
Remove any accumulation of snow at the base of the windscreen.
Changing the wiper blades
If you have to replace them, the
wiper blades have to be parked in
this, switch off the ignition and then
within one minute move the wiper
control stalk. The wipers stand up
resume their normal position.
To operate the windscreen wash,
pull the wiper stalk towards you.
The screen wash is accompanied
by a timed wipe of the windscreen,
the headlamp wash also activates
if the dipped beams are on.
When the windscreen wipers are
operational and reverse gear is
Activation/deactivation of this func-
tion is possible in the menu “Per-
sonalisation/Confi guration” in the
Deactivation may be necessary
when a bicycle-carrier is installed