To raise or lower the head restraint, pull it forwards at the same
The adjustment is correct when the top edge of the head
restraint is at the same height as the top of the head.
To remove it, bring it to the high position. Lift the tab with the aid of a coin
Action the control rearwards and adjust the angle of the back-
It is possible to recline the backrest to an angle of 45° by tilt-
ing it until it locks. Press the control to unlock.
The front seats can be heated indi-
vidually. Use the controls located
at the side of the seats, and select
one of the three heating levels:
The seat temperature adjusts auto-
The heated seats only oper-
ate when the engine is running.
Seat height and rake adjustment
Lift the control and use the weight of your body to move the
seat to the desired position.
Lift the control bar and adjust to the desired position.
Access to the rear seat positions
To access the rear seat positions, action the control forwards
to fold the backrest and slide the front seat.
Afterwards the front seat will revert to its initial position.
Make sure that the seat is secured in place (particularly if the