ENGINE
100
EXHAUST SPECIFICATIONS
Engine : 4HX
Tightening torques (m.daN)
(2) Collars 2.5 ± 0.3
Repair
Respect the precautions to be taken when
operating on a vehicle.
The flexible pipe must not come into contact
with corrosive products.
Do not distort the flexible pipe by more than 20°
angular (X), 20mm axial, 25 mm shear (Y)
(flexible pipe not fitted).
Do not distort the flexible pipe by more than 3°
angular (X), 0 mm axial, 3 mm shear
(Y) (flexible pipe in place).
WARNING : Non-respect for these precautions
will result in a reduction in the lifetime of the
flexible pipe. It is thus essential to disconnect or
remove the exhaust line in any operation neces-
sitating the lifting of the power unit.
Engine Front pipe (1) Pre-catalyser (3) Particle filter (4) Rear silencer (5)
4HX Flexible PSA K 186 PSA F 002 PSA 4158
To Next Page
Loading...
