CITROEN C5 2000 User Manual

2000
2000
CAR 050007
AC/QCAV/MTD
Méthodes Techniques Documentation
 ’’The intellectual property rights relating to the technical information contained in this document belong
exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part without
prior written authorisation from the manufacturer is forbidden.‘‘
PRIVATE CARS
«The technical information contained in this document is intended for the exclusive use of the trained personnel of the
motor vehicle repair trade. In some instances, this information could concern the security and safety of the vehicle. The
information is to be used by the professional vehicle repairers for whom it is intended and they alone would assume full
responsibility to the exclusion of that of the manufacturer».
’’The technical information appearing in this brochure is subject to updating as the characteristics of each
model in the range evolve. Motor vehicle repairers are invited to contact the CITROËN network periodically
for further information and to obtain any possible updates».

CITROEN C5 2000 Specifications

General

Brand	CITROEN
Model	C5 2000
Category	Automobile
Language	English

Summary

GENERAL

Identification of vehicles

Details on identifying vehicle VIN, plates, and codes.

General Specification : Weights

General Specification : Towing the Vehicle

Guidelines and precautions for towing the vehicle.

General Specification: Lifting and Supporting the Vehicle

Procedures and safety notes for lifting and supporting the vehicle.

Lubricants – TOTAL recommended oils

Recommended engine oils, lubricants, and their specifications.

ENGINE

Engine Specifications

Technical data for petrol and diesel engines.

Cylinder Head

Identification and specifications for cylinder heads.

Special Features : Tightening Torques

Torque specifications for various engine components.

Auxiliary Equipment Drive Belt

Checking and Setting the Valve Timing

Steps for checking and setting engine valve timing.

Cooling System Specifications

Checking the Oil Pressure

Procedures and values for checking engine oil pressure.

Filling and Bleeding the Cooling Circuit

INJECTION

Petrol Injection

Specifications for petrol injection systems.

Prohibited Operations : HDi Direct Injection System

Operations to avoid with the HDi direct injection system.

Safety Requirements : HDi Direct Injection System

Safety precautions for HDi direct injection system work.

Checks : Low Pressure Fuel Supply Circuit

Procedures for checking the low-pressure fuel supply circuit.

Air Supply Circuit Specification

CLUTCH-GEARBOX-DRIVESHAFTS

AXLES-SUSPENSION-STEERING

Axle Geometry

Suspension

Front and rear suspension specifications and tightening torques.

Steering

BRAKES

Brake Specifications

Specifications for front and rear brake components.

Handbrake (Adjustment)

Bleeding and Filling the Braking System

HYDRAULICS SYSTEM

Hydraulic Specifications

Specification - Identification : Suspension Spheres

AIR CONDITIONING

Special Features : Air Conditioning System (R 134.a)

Checking the Compressor Oil Level

Checking Pressures