CITROEN C5 2000 - Bleeding and Filling the Braking System

BRAKE SPECIFICATIONS
(7) Hydraulic block
Elements
Electronic
ABS MK.60 47 way connector.
ECU
7 ITT - A Alone on the hydraulic block.
BASR MK.60 Changing only the ECU is prohibited.
2 way black connector.
Front wheel
The sensors are inductive-type.
5 ITT - A 96 332 952 80 Mounted on the pivot.
sensor
Non-adjustable airgap : 0.2 à 1.5 mm.
Tightening torque : 0.8 ± 0.2 m.daN
2 way black connector.
Rear wheel
The sensors are inductive-type.
sensor
96 332 954 80 Mounted on the brake caliper support.
Non-adjustable airgap : 0.15 à 1.6 mm.
Tightening torque : 0.8 ± 0.2 m.daN
Hub
4 SNR
Hub equipped with a bearing with an integral
bearing magnetic wheel (48 pairs of poles).
ABS MK.60
Hydraulic
96 371 711 80 Installed on the front LH wheelarch.
block
7 TEVES
BASK MK.60 4 adjustment channels.
96 371 712 80
Ref. Supplier
Part No.
Observations
B3FP12XC
BRAKES
227