GENERAL
1
IDENTIFICATION OF VEHICLES
E1APO8RD
(A) Chassis stamp
(cold stamp on bodywork).
(B) Manufacturer’s data plate.
(under the rear bench seat)
(C) A-S / RP No. and RP paint code
(label on front pillar close to driver’s door).
(D) Inflation pressures and tyre references.
(label on front pillar close to driver’s door)
(E) Serial no. on bodywork.
(F) Gearbox reference – Factory serial no.
(G) Engine legislation type – Factory serial no.
GENERAL
To Next Page
Loading...
