HYDRAULIC
SYSTEM
SPECIFICATION - IDENTIFICATION : SUSPENSION SPHERES
Hydractive 3 suspension
Front suspension sphere (1)
WARNING : The number marked on the suspension sphere is the reference no. of the component and not the Part No.
Engines Suspension sphere marking Volume (cc) Pressure (Bars) Diameter of damper hole (mm)
6FZ 96 420 906 80 385 57 1.9/1.3
RHY-RHZ 96 420 907 80 1.75/1.3
Rear suspension sphere (2)
All Types 96 420 905 80 385 25 0.7/0.48
Hydractive 3+ suspension
Front suspension sphere (1)
RFN-RLZ 96 420 908 80 385 44 0.9/0.48
XFX-4HX 96 420 909 80 52
Rear suspension sphere (2)
All Types 96 422 091 80 385 31 1.4/0.94
Hydractive regulator accumulator
Hydractive regulator Suspension sphere marking Volume (cc) Pressure (Bars)
Front (3) 96 420 898 80 385 62
Rear (4) 96 373 373 80 45
240
To Next Page
Loading...
