ENGINE
39
CYLINDER HEAD (Continued)
Engines : 6FZ - RFN - RLZ
Camshafts
The camshafts are identified by the
following markings :
- Paint rings.
- Cold stamp at the camshaft extremity
(Distribution end).
(1) Inlet camshaft.
(2) Exhaust camshaft.
"j" Camshaft position sensor target.
"h" Paint rings : repair reference.
Valve clearances when cold :
Hydraulic followers with clearance
B1EP15YD
Inlet camshaft Exhaust camshaft
6FZ RFN-RLZ 6FZ RFN-RLZ
Marking at «g» 9630426980 9624727280 9630426680 9624728080
Lifting law marking at «f» D1269 D1149 D5016 D1148
Paint rings Blue at «k» Green at «i»
To Next Page
Loading...
